Make/Modify a Component in Proteus (2D Graphics) In this article, a user-friendly feature in the Proteus software is presented, which is the Make Device. For this purpose, 2D…
Interfacing GSM Module Using Proteus The Proteus simulation software can be used to interface real-time modules like the GSM Module. By using this simulation feature the designer can…
UART Between Microcontrollers Using Proteus UART stands for Universal Asynchronous Reception and Transmission of data serially between two terminals. This mode of communication has the advantage of data…
In this article let’s discuss designing of matrix keypads and the programming part to get the information regarding the pressed key. The Matrix keypads are used in systems/control…
Designing a Real Time Clock using Dot Matrix Display on Proteus Objective -Display Time on an 8X32 Dot matrix Display In this article, a Real Time Clock RTC…
In this chapter, let’s learn how to use the Virtual COM Ports in Proteus software. Virtual ports offer an option to connect the external hardware to the simulation software. The…
555-Timer is one of the most popular and mostly used ICs. It best suits for timing/timekeeping related circuits. It consists of two operational amplifiers operated in an open…
In this chapter, we deal with Operational Amplifiers (Op Amps) in Proteus. The previous chapter was about Transistor Circuits in Proteus. So let’s begin to learn about Operational Amplifiers…
Proteus software contains a large number of almost all types of transistors. This software can be used as a Transistor selector in circuits designing. This chapter on Proteus…
Proteus software has a big and vast collection of Digital IC library. This software can be used as an IC selector in digital circuits designing. Circuit designers don’t…
This chapter is part of our Proteus Tutorial series. In this chapter we explain circuit analysis using virtual instruments in Proteus. Oscilloscope Proteus provides oscilloscope, which is a very…
Arrangement of LED’s Consider an 8X8 matrix display, which means it contains 8 LED’s in each row and 8 such rows are used to form the matrix. Thus,…
Segment Displays Inside Segment Displays Segment Displays contain LEDs arranged in a specific fashion such that, various characters or shapes can be displayed, by turning ON selective segments…
How to work with Light Emitting Diode (LED) in Proteus In this post we will be learning on how to use the “Light Emitting Diode (LED)” component in Proteus simulation…
In this tutorial, we will be learning on how to use the “Switch” component in Proteus simulation software. In case you have not got on through the basics of…
Proteus is a simulation and design software tool developed by Labcenter Electronics for Electrical and Electronic circuit design. It also possess 2D CAD drawing feature. It deserves to…
